80.3025KRCTXRIK - Radial drill. and mill. head offset, For collet 250 430E (ER25 Ø2-16), with tapered roller bearing, DIN 5480 drive, Int. / ext. coolant pmax = 70bar, i = 1:1 (input equal output),

Article number: 163349
Radial drilling and milling head reset
Premium class tooling system for highest production efficiency - Made in Germany
Collet chuck ER25 DIN6499
Clamping range Ø2-16
For collet 250 430E
When tightening the clamping nut, it is essential to counterhold the tool spindle.
Failure to observe the counterholding may result in damage to the gearbox or drive coupling.
Maximum tightening torque: 90 Nm
Tapered roller bearings (KR) - extraordinarily loadable.
Recommended for machining operations with high torques (e.g.: milling operations with large diameters, threading operations, interrupted cut machining)
Increase of tool life
Reduction of service intervals
Simultaneous radial and axial loads can be easily absorbed
Internal cooling
Equipped with high-quality seal kits that can withstand coolant pressure of up to 70 bar.
70 bar maximum coolant pressure
Not capable of dry running
Change between external and internal cooling possible
Coolant must be applied to the tool at all times
Загрузить PDF