60.4032KRSQT15RIKX140 - Radial drilling and milling head, For collet 320 470E (ER32 Ø3-20), with tapered roller bearing, Similar to DIN 1809 drive, Int. / ext. coolant pmax = 70bar, i =1:1 direction of rotation inver., X = 140mm,
Article number: 162722Загрузить PDFRadial drilling and milling head
Premium class tool system for highest production efficiency - Made in Germany
Collet chuck ER32 DIN6499
- Clamping range Ø3-20
- For collet 320 470E
- When tightening the clamping nut, it is essential to counterhold the tool spindle.
- Failure to observe the counter-hold can result in damage to the gearbox or drive coupling.
- Maximum tightening torque: 120 Nm
Tapered roller bearings (KR) - extraordinarily loadable.
- Recommended for machining operations with high torques (e.g.: milling operations with large diameters, threading operations, interrupted cut machining)
- Increase of tool life
- Reduction of service intervals
- Simultaneous radial and axial loads can be easily absorbed
Internal cooling
Equipped with high-quality seal kits that can withstand coolant pressure of up to 70 bar.
- 70 bar maximum coolant pressure
- Not capable of dry running
- Change between external and internal cooling possible
- Coolant must be applied to the tool at all times
| Functional length (LF) | 140.00 mm |
|---|---|
| Total height (OAH) | 76.00 mm |
| Number of holders, workpiece side (CCONWS) | 1 |
| Shank size | VDI40 shaft rotated 30° |
| Interface size | Collet ER32 |
| Coolant intake | Inner and outer cooling |
| Coupling | Surface coupling |
| Article number | 162722 |
|---|---|
| Product weight | 9.408 KG |