60.4032KRCTXRIKTF-PL - Radial drilling and milling head, For collet 320 470E (ER32 Ø3-20), with tapered roller bearing, DIN 5480 drive, Int. / ext. coolant pmax = 70bar, i =1:1 direction of rotation inver., adjusting system for Trifix turret, Pro-Line (screwed),

Article number: 181674
Radial drilling and milling head
Premium class tool system for highest production efficiency - Made in Germany
Collet chuck ER32 DIN6499
Clamping range Ø3-20
For collet 320 470E
When tightening the clamping nut, it is essential to counterhold the tool spindle.
Failure to observe the counter-hold can result in damage to the gearbox or drive coupling.
Maximum tightening torque: 120 Nm
Tapered roller bearings (KR) - extraordinarily loadable.
Recommended for machining operations with high torques (e.g.: milling operations with large diameters, threading operations, interrupted cut machining)
Increase of tool life
Reduction of service intervals
Simultaneous radial and axial loads can be easily absorbed
Internal cooling
Equipped with high-quality seal kits that can withstand coolant pressure of up to 70 bar.
70 bar maximum coolant pressure
Not capable of dry running
Change between external and internal cooling possible
Coolant must be applied to the tool at all times
Trifix© (TF) alignment system
Tool completely preset
Faster setup of your machine
Repeatability < 6µm at 200mm throat depth
Positioning accuracy of 0.01mm from one station to another
EWS.Proline (PL)
Significantly increased stability
4-fold screw connections
Reduction of vibrations
Загрузить PDF