60.3016WNKRLCTXRLIKTFR - Radial drilling and milling head, Whistle Notch/Weldon Ø16, with tapered roller bearing, DIN 5480 drive, Int. / ext. coolant pmax = 70bar, i =1:1 direction of rotation inver., Trifix-alignment right,
Article number: 177197Загрузить PDFRadial drilling and milling head
Premium class tool system for highest production efficiency - Made in Germany
Tapered roller bearings (KR) - extraordinarily loadable.
- Recommended for machining operations with high torques (e.g.: milling operations with large diameters, threading operations, interrupted cut machining)
- Increase of tool life
- Reduction of service intervals
- Simultaneous radial and axial loads can be easily absorbed
Double toothing (Traub license)
- VDI shank double toothed.
- Tool holder can be rotated 180°.
- Note: Rotatability may be restricted by alignment systems (e.g. Trifix).
Internal cooling
Equipped with high-quality seal kits that can withstand coolant pressure of up to 70 bar.
- 70 bar maximum coolant pressure
- Not capable of dry running
- Change between external and internal cooling possible
- Coolant must be applied to the tool at all times
Trifix© (TF) alignment system
- Tool completely preset
- Faster setup of your machine
- Repeatability < 6µm at 200mm throat depth
- Positioning accuracy of 0.01mm from one station to another
| Number of holders, workpiece side (CCONWS) | 1 |
|---|---|
| Shank size | VDI30 |
| Interface size | Weldon Ø 16.0 Whistle Notch Ø 16.0 |
| Coolant intake | Inner and outer cooling |
| Coupling | DIN 5480 |
| Article number | 177197 |
|---|---|
| Product weight | 5.035 KG |