60.2525KRL5480RLTFL - Radial drilling and milling head, For collet 250 430E (ER25 Ø2-16), with tapered roller bearing, DIN 5480 drive, External coolant supply, i =1:1 direction of rotation inver., Trifix-alignment left,
Article number: 205975Загрузить PDFRadial drilling and milling head
Premium class tool system for highest production efficiency - Made in Germany
Collet chuck ER25 DIN6499
- Clamping range Ø2-16
- For collet 250 430E
- When tightening the clamping nut, it is essential to counterhold the tool spindle.
- Failure to observe the counterholding may result in damage to the gearbox or drive coupling.
- Maximum tightening torque: 90 Nm
Tapered roller bearings (KR) - extraordinarily loadable.
- Recommended for machining operations with high torques (e.g.: milling operations with large diameters, threading operations, interrupted cut machining)
- Increase of tool life
- Reduction of service intervals
- Simultaneous radial and axial loads can be easily absorbed
Double toothing (Traub license)
- VDI shank double toothed.
- Tool holder can be rotated 180°.
- Note: Rotatability may be restricted by alignment systems (e.g. Trifix).
Trifix© (TF) alignment system
- Tool completely preset
- Faster setup of your machine
- Repeatability < 6µm at 200mm throat depth
- Positioning accuracy of 0.01mm from one station to another
| Number of holders, workpiece side (CCONWS) | 1 |
|---|---|
| Shank size | VDI25 |
| Interface size | Collet ER25 |
| Coolant intake | Outer cooling |
| Coupling | DIN 5480 |
| Article number | 205975 |
|---|---|
| Product weight | 5.908 KG |