40.4032HAASSL40IKIM - Axial drilling and milling head, For collet 320 470E (ER32 Ø3-20), Int. / ext. coolant pmax = 25bar, i = 1:1 (input equal output), inside collet nut,
Article number: 145611Загрузить PDFAxial drilling and milling head
Premium class tool system for highest production efficiency - Made in Germany
Collet chuck ER32 DIN6499
- Clamping range Ø3-20
- For collet 320 470E
- When tightening the clamping nut, it is essential to counterhold the tool spindle.
- Failure to observe the counter-hold can result in damage to the gearbox or drive coupling.
- Maximum tightening torque: 120 Nm
Internal cooling
Equipped with high-quality seal kits that can withstand coolant pressure of up to 25 bar.
- 25 bar maximum coolant pressure
- Not capable of dry running
- Change between external and internal cooling possible
- Coolant must be applied to the tool at all times
| Total height (OAH) | 85.00 mm |
|---|---|
| Number of holders, workpiece side (CCONWS) | 1 |
| Max. torque (TQX) | 50.00 Nm |
| Max. rotational speed, input (RPMX) | 6000 min-1 |
| Transmission relation (TR) | 1:1 |
| Transmission torque, output drive 1 (DINH201) | 50.00 Nm |
| Shank size | VDI40 |
| Interface size | Collet ER32 |
| Coolant intake | Inner and outer cooling |
| Coupling | Claw coupling |
| Article number | 145611 |
|---|---|
| Product weight | 3.857 KG |