50.75401809I2GLIM - Ax. drill. and mill. head offset, For collet 400 472E (ER40 Ø4-26), DIN 1809 drive, External coolant supply, i = 2:1 same rotating direction, inside collet nut,
Article number: 171988Axial drilling and milling head with offset axes
Premium class tooling system for highest production efficiency - Made in Germany
Collet chuck ER40 DIN6499
- Clamping range Ø4-26
- For collet 400 472E
- When tightening the clamping nut, it is essential to counterhold the tool spindle.
- Failure to observe the counterholding may result in damage to the gearbox or drive coupling.
- Maximum tightening torque: 160 Nm
Загрузить PDF
| Total height (OAH) | 112.00 mm |
|---|---|
| Number of holders, workpiece side (CCONWS) | 1 |
| Max. torque (TQX) | 80.00 Nm |
| Max. rotational speed, input (RPMX) | 4000 min-1 |
| Transmission relation (TR) | 2:1 |
| Transmission torque, output drive 1 (DINH201) | 160.00 Nm |
| Shank size | BMT75 |
| Interface size | ER40 |
| Coolant intake | Outer cooling |
| Coupling | Surface coupling |
| Alignment system | BMT – keyway |
| Article number | 171988 |
|---|---|
| Product weight | 15.71 KG |