80.30325482RIKS02 - Radial drill. and mill. head offset, For collet 320 470E (ER32 Ø3-20), DIN 5482 drive, Int. / ext. coolant pmax = 70bar, i = 1:1 (input equal output), [001AGW_09_S02],
Article number: 118910Загрузить PDFRadial drilling and milling head reset
Premium class tooling system for highest production efficiency - Made in Germany
Collet chuck ER32 DIN6499
- Clamping range Ø3-20
- For collet 320 470E
- When tightening the clamping nut, it is essential to counterhold the tool spindle.
- Failure to observe the counter-hold can result in damage to the gearbox or drive coupling.
- Maximum tightening torque: 120 Nm
Internal cooling
Equipped with high-quality seal kits that can withstand coolant pressure of up to 70 bar.
- 70 bar maximum coolant pressure
- Not capable of dry running
- Change between external and internal cooling possible
- Coolant must be applied to the tool at all times
| Functional length (LF) | 100.00 mm |
|---|---|
| Total height (OAH) | 76.00 mm |
| Number of holders, workpiece side (CCONWS) | 1 |
| Shank size | VDI30 |
| Interface size | Collet ER32 |
| Coolant intake | Inner and outer cooling |
| Coupling | DIN 5482 |
| Article number | 118910 |
|---|---|
| Product weight | 6.906 KG |