60.3016WNKRLCTXRLIKTFR - Radial drilling and milling head, Whistle Notch/Weldon Ø16, with tapered roller bearing, DIN 5480 drive, Int. / ext. coolant pmax = 70bar, i =1:1 direction of rotation inver., Trifix-alignment right,

Article number: 177197
Radial drilling and milling head
Premium class tool system for highest production efficiency - Made in Germany
Tapered roller bearings (KR) - extraordinarily loadable.
Recommended for machining operations with high torques (e.g.: milling operations with large diameters, threading operations, interrupted cut machining)
Increase of tool life
Reduction of service intervals
Simultaneous radial and axial loads can be easily absorbed
Double toothing (Traub license)
VDI shank double toothed.
Tool holder can be rotated 180°.
Note: Rotatability may be restricted by alignment systems (e.g. Trifix).
Internal cooling
Equipped with high-quality seal kits that can withstand coolant pressure of up to 70 bar.
70 bar maximum coolant pressure
Not capable of dry running
Change between external and internal cooling possible
Coolant must be applied to the tool at all times
Trifix© (TF) alignment system
Tool completely preset
Faster setup of your machine
Repeatability < 6µm at 200mm throat depth
Positioning accuracy of 0.01mm from one station to another
Загрузить PDF