80.4040KRCTXRI2 - Radial drill. and mill. head offset, For collet 400 472E (ER40 Ø4-26), with tapered roller bearing, DIN 5480 drive, External coolant supply, i = 2:1 same rotating direction,
Article number: 179331Загрузить PDFRadial drilling and milling head reset
Premium class tooling system for highest production efficiency - Made in Germany
Collet chuck ER40 DIN6499
- Clamping range Ø4-26
- For collet 400 472E
- When tightening the clamping nut, it is essential to counterhold the tool spindle.
- Failure to observe the counterholding may result in damage to the gearbox or drive coupling.
- Maximum tightening torque: 160 Nm
Tapered roller bearings (KR) - extraordinarily loadable.
- Recommended for machining operations with high torques (e.g.: milling operations with large diameters, threading operations, interrupted cut machining)
- Increase of tool life
- Reduction of service intervals
- Simultaneous radial and axial loads can be easily absorbed
| Number of holders, workpiece side (CCONWS) | 1 |
|---|---|
| Shank size | VDI40 |
| Interface size | ER40 |
| Coolant intake | Outer cooling |
| Coupling | DIN 5480 |
| Article number | 179331 |
|---|---|
| Product weight | 4.385 KG |