TTSIR/L
Boring bars with coolant hole for internal turning andgrooving on small diameter of Dmin = 12.5 mm with TDIM/Pinserts
| Designation | CW | SSC | DCONMS | OAL | LH | WF | HF | WB | CDX | DMIN |
|---|---|---|---|---|---|---|---|---|---|---|
| TTSIL 10-12.5-2 | 2.00 | 2 | 10.00 | 125.00 | 25.0 | 7.50 | 4.5 | 1.60 | 2.40 | 12.50 |
| TTSIR 10-12.5-2 | 2.00 | 2 | 10.00 | 125.00 | 25.0 | 7.50 | 4.5 | 1.60 | 2.40 | 12.50 |
| TTSIL 12-14-2 | 2.00 | 2 | 12.00 | 125.00 | 35.0 | 9.10 | 5.5 | 1.60 | 2.60 | 14.00 |
| TTSIR 12-14-2 | 2.00 | 2 | 12.00 | 125.00 | 35.0 | 9.10 | 5.5 | 1.60 | 2.60 | 14.00 |
| TTSIL 16-12.5-2 | 2.00 | 2 | 16.00 | 150.00 | 20.0 | 10.50 | 7.5 | 1.60 | 2.40 | 12.50 |
| TTSIR 16-12.5-2 | 2.00 | 2 | 16.00 | 150.00 | 20.0 | 10.50 | 7.5 | 1.60 | 2.40 | 12.50 |
| TTSIL 16-14-2 | 2.00 | 2 | 16.00 | 150.00 | 25.0 | 11.00 | 7.5 | 1.60 | 2.60 | 14.00 |
| TTSIR 16-14-2 | 2.00 | 2 | 16.00 | 150.00 | 25.0 | 11.00 | 7.5 | 1.60 | 2.60 | 14.00 |
| TTSIL 16-16-2 | 2.00 | 2 | 16.00 | 150.00 | 40.0 | 11.00 | 7.5 | 1.60 | 3.00 | 16.00 |
| TTSIR 16-16-2 | 2.00 | 2 | 16.00 | 150.00 | 40.0 | 11.00 | 7.5 | 1.60 | 3.00 | 16.00 |
| TTSIL 12-14-3 | 3.00 | 3 | 12.00 | 125.00 | 35.0 | 9.10 | 5.5 | 2.00 | 2.60 | 14.00 |
| TTSIR 12-14-3 | 3.00 | 3 | 12.00 | 125.00 | 35.0 | 9.10 | 5.5 | 2.00 | 2.60 | 14.00 |
| TTSIL 16-12.5-3 | 3.00 | 3 | 16.00 | 150.00 | 20.0 | 10.50 | 7.5 | 2.00 | 2.40 | 12.50 |
| TTSIR 16-12.5-3 | 3.00 | 3 | 16.00 | 150.00 | 20.0 | 10.50 | 7.5 | 2.00 | 2.40 | 12.50 |
| TTSIL 16-14-3 | 3.00 | 3 | 16.00 | 150.00 | 25.0 | 11.00 | 7.5 | 2.00 | 2.60 | 14.00 |
| TTSIR 16-14-3 | 3.00 | 3 | 16.00 | 150.00 | 25.0 | 11.00 | 7.5 | 2.00 | 2.60 | 14.00 |
| TTSIL 16-16-3 | 3.00 | 3 | 16.00 | 150.00 | 40.0 | 11.00 | 7.5 | 2.00 | 3.00 | 16.00 |
| TTSIR 16-16-3 | 3.00 | 3 | 16.00 | 150.00 | 40.0 | 11.00 | 7.5 | 2.00 | 3.00 | 16.00 |
| TTSIL 20-20-3 | 3.00 | 3 | 20.00 | 150.00 | 40.0 | 14.00 | 9.0 | 2.00 | 4.00 | 20.00 |
| TTSIR 20-20-3 | 3.00 | 3 | 20.00 | 150.00 | 40.0 | 14.00 | 9.0 | 2.00 | 4.00 | 20.00 |