TNMA
Negative 60 Triangular insert without chip former for rough machining of cast irons
| Designation | IC | S | RE | ap (min) |
ap (max) |
ft (min) |
ft (max) |
Tough ‹————› Hard Grade & Vc Click on grade for cutting speed value |
|---|---|---|---|---|---|---|---|---|
| TNMA 160404 | 9.52 | 4.76 | 0.40 | 1.00 | 4.00 | 0.15 | 0.30 | TT7015 TT7005 K10 |
| TNMA 160408 | 9.52 | 4.76 | 0.80 | 1.00 | 4.00 | 0.15 | 0.40 | TT7015 TT7005 K10 |
| TNMA 160412 | 9.52 | 4.76 | 1.20 | 1.50 | 4.50 | 0.20 | 0.50 | TT7015 TT7005 |
| TNMA 160416 | 9.52 | 4.76 | 1.60 | 1.00 | 4.50 | 0.20 | 0.50 | TT7015 TT7005 |
| TNMA 220408 | 12.70 | 4.76 | 0.80 | 1.50 | 5.00 | 0.15 | 0.40 | TT7015 TT7005 K10 |
| TNMA 220412 | 12.70 | 4.76 | 1.20 | 1.50 | 5.00 | 0.20 | 0.50 | TT7015 TT7005 |
| TNMA 220416 | 12.70 | 4.76 | 1.60 | 2.00 | 5.00 | 0.20 | 0.61 | TT7015 TT7005 |