TERD-05/07
End mills with positive round inserts for profiling and milling of round corners
| Designation | DCX | DC | DCONMS | OAL | LH | LU | BHTA | APMX | CSP | Fig. | Shank | WT | MIID |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| TERD 108-W10-05 | 8.00 | 3.00 | 10.00 | 80.00 | 20.0 | – | – | 2.50 | O | 1 | W | 0.04 | RDMX 0501-M |
| TERD 210-W12-05 | 10.00 | 5.00 | 12.00 | 80.00 | 30.0 | – | – | 2.50 | O | 1 | W | 0.05 | RDMX 0501-M |
| TERD 212-W12-05 | 12.00 | 7.00 | 12.00 | 100.00 | 40.0 | – | – | 2.50 | O | 1 | W | 0.07 | RDMX 0501-M |
| TERD 212-16-05-L | 12.00 | 7.00 | 16.00 | 200.00 | 60.0 | 34.0 | 2.0 | 2.50 | O | 2 | C | 0.26 | RDMX 0501-M |
| TERD 215-W20-07 | 15.00 | 8.00 | 20.00 | 140.00 | 48.8 | – | – | 3.50 | O | 1 | W | 0.27 | RDMX 0702-M |
| TERD 215-20-07-L | 15.00 | 8.00 | 20.00 | 200.00 | 74.9 | 34.0 | 3.5 | 3.50 | O | 2 | C | 0.40 | RDMX 0702-M |
| TERD 217-16-07-L160 | 17.00 | 10.00 | 16.00 | 160.00 | 25.0 | – | – | 3.50 | O | 3 | C | 0.23 | RDMX 0702-M |
| TERD 217-16-07-L200 | 17.00 | 10.00 | 16.00 | 200.00 | 25.0 | – | – | 3.50 | O | 3 | C | 0.29 | RDMX 0702-M |