TCMT-SM
Triangular Inserts with a 7 Positive Flank for Semi-Finishing and Finish Turning on Soft Materials and Exotic Alloys(+)
| Designation | L | IC | S | RE | D1 | ft (min) |
ft (max) |
ap (min) |
ap (max) |
Tough ‹————› Hard Grade & Vc Click on Grade No. for Cutting Speed |
|
|---|---|---|---|---|---|---|---|---|---|---|---|
| TCMT 110204-SM | 11.00 | 6.35 | 2.38 | 0.40 | 2.80 | 0.05 | 0.25 | 0.20 | 3.00 | IC8350 IC9350 IC8250 IC9250 IC908 IC8150 IC9150 IC5010 IC5005 IC807 IC907 |
|
| TCMT 110208-SM | 11.00 | 6.35 | 2.38 | 0.80 | 2.80 | 0.07 | 0.25 | 0.50 | 2.50 | IC9250 IC807 IC907 | |
| TCMT 16T304-SM | 16.50 | 9.52 | 3.97 | 0.40 | 4.40 | 0.06 | 0.25 | 0.50 | 3.00 | IC830 IC8250 IC9250 IC8150 IC9150 IC570 IC428 IC5005 IC807 IC907 |
|
| TCMT 16T308-SM | 16.50 | 9.52 | 3.97 | 0.80 | 4.40 | 0.08 | 0.28 | 0.50 | 3.00 | IC830 IC9350 IC8250 IC9250 IC8150 IC9150 IC5005 IC807 IC907 | |
| TCMT 22T308-SM | 22.00 | 12.70 | 3.97 | 0.80 | 5.50 | 0.20 | 0.35 | 0.50 | 4.00 | IC9150 |