RCGX-CERAMIC
Positive Round ground Ceramic inserts with 7 clearance angle with V shape bottom for nickel based super alloys & hardened steels machining
| Designation | IC | S | ap (min) |
ap (max) |
ft (min) |
ft (max) |
Tough ‹————› Hard Grade & Vc Click on grade for cutting speed value |
|---|---|---|---|---|---|---|---|
| RCGX 060400 T6 | 6.35 | 4.76 | 0.10 | 2.00 | 0.05 | 0.25 | TC3020 |
| RCGX 060600 T6 | 6.35 | 6.35 | 0.10 | 2.00 | 0.05 | 0.25 | TC430 |
| RCGX 060600 U1 | 6.35 | 6.35 | 0.10 | 2.00 | 0.05 | 0.25 | AB30 |
| RCGX 090700 E | 9.52 | 7.94 | 0.10 | 3.00 | 0.05 | 0.35 | TC3030 TC3020 |
| RCGX 090700 E04 | 9.52 | 7.94 | 0.10 | 3.00 | 0.05 | 0.30 | TC3030 TC3020 |
| RCGX 090700 T2 | 9.52 | 7.94 | 0.10 | 3.00 | 0.05 | 0.30 | AB30 |
| RCGX 090700 T6 | 9.52 | 7.94 | 0.10 | 3.00 | 0.05 | 0.30 | TC3030 TC3020 TC430 |
| RCGX 090700 U1 | 9.52 | 7.94 | 0.10 | 3.00 | 0.05 | 0.30 | AB30 AB20 |
| RCGX 120700 | 12.70 | 7.94 | 0.10 | 4.00 | 0.05 | 0.35 | AB30 |
| RCGX 120700 E04 | 12.70 | 7.94 | 0.10 | 4.00 | 0.05 | 0.35 | TC3030 TC3020 |
| RCGX 120700 T6 | 12.70 | 7.94 | 0.10 | 4.00 | 0.05 | 0.35 | TC430 TC3030 TC3020 |
| RCGX 120700 U2 | 12.70 | 7.94 | 0.10 | 4.00 | 0.05 | 0.35 | AB30 AB20 |
| RCGX 120700 E | 12.70 | 7.94 | 0.10 | 4.00 | 0.05 | 0.35 | TC3030 TC3020 |
| RCGX 151000 U2 | 15.88 | 10.00 | 0.10 | 5.00 | 0.05 | 0.35 | AB30 AB20 |
| RCGX 191000 U2 | 19.05 | 10.00 | 0.10 | 5.00 | 0.05 | 0.35 | AB30 AB20 |
| RCGX 251200 U3 | 25.40 | 12.00 | 0.10 | 5.00 | 0.05 | 0.35 | AB30 |