MM HC
Interchangeable Solid Carbide Slot Drill Milling Heads with Two 10 Helix Flutes(+)
| Designation | DC | NOF | APMX | RE | Tm | THSZMS | DCONMS | LF | FHA | fz (min) |
fz (max) |
Tough ‹————› Hard Grade & Vc Click on Grade No. for Cutting Speed |
|
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MM HC078C08R0.2-2T05 | 7.80 | 2 | 7.70 | 0.20 | r0-2.0 | T05 | 7.60 | 10.00 | 10.0 | 0.03 | 0.09 | IC908 | |
| MM HC080C08R0.4-2T05 | 8.00 | 2 | 7.70 | 0.40 | r0-2.0 | T05 | 7.60 | 10.00 | 10.0 | 0.03 | 0.09 | IC908 IC903 | |
| MM HC080C08R1.0-2T05 | 8.00 | 2 | 7.70 | 1.00 | r0-2.0 | T05 | 7.60 | 10.00 | 10.0 | 0.03 | 0.09 | IC908 IC903 | |
| MM HC080C08R2.0-2T05 | 8.00 | 2 | 7.70 | 2.00 | r0-2.0 | T05 | 7.60 | 10.00 | 10.0 | 0.03 | 0.09 | IC908 IC903 | |
| MM HC098C10R0.3-2T06 | 9.80 | 2 | 9.00 | 0.30 | r0-3.0 | T06 | 9.50 | 12.35 | 10.0 | 0.03 | 0.10 | IC908 | |
| MM HC100C10R0.4-2T06 | 10.00 | 2 | 9.00 | 0.40 | r0-3.0 | T06 | 9.50 | 12.35 | 10.0 | 0.03 | 0.10 | IC908 IC903 | |
| MM HC100C10R1.0-2T06 | 10.00 | 2 | 9.00 | 1.00 | r0-3.0 | T06 | 9.50 | 12.35 | 10.0 | 0.03 | 0.10 | IC908 IC903 | |
| MM HC100C10R2.0-2T06 | 10.00 | 2 | 9.00 | 2.00 | r0-3.0 | T06 | 9.50 | 12.35 | 10.0 | 0.03 | 0.10 | IC908 IC903 | |
| MM HC117C13R0.3-2T08 | 11.70 | 2 | 10.00 | 0.30 | r0-3.0 | T08 | 11.50 | 14.20 | 10.0 | 0.04 | 0.11 | IC908 | |
| MM HC120C13R0.4-2T08 | 12.00 | 2 | 10.00 | 0.40 | r0-3.0 | T08 | 11.50 | 14.20 | 10.0 | 0.04 | 0.11 | IC908 IC903 | |
| MM HC120C13R1.0-2T08 | 12.00 | 2 | 10.00 | 1.00 | r0-3.0 | T08 | 11.50 | 14.20 | 10.0 | 0.04 | 0.11 | IC908 IC903 | |
| MM HC120C13R2.0-2T08 | 12.00 | 2 | 10.00 | 2.00 | r0-3.0 | T08 | 11.50 | 14.20 | 10.0 | 0.04 | 0.11 | IC908 IC903 | |
| MM HC140C11R0.4-2T08 | 14.00 | 2 | 11.60 | 0.40 | r0-4.0 | T08 | 11.50 | 15.05 | 10.0 | 0.04 | 0.12 | IC908 | |
| MM HC157C16R0.3-2T10 | 15.70 | 2 | 15.00 | 0.30 | r0-4.0 | T10 | 15.20 | 19.05 | 10.0 | 0.05 | 0.13 | IC908 | |
| MM HC160C16R0.4-2T10 | 16.00 | 2 | 14.90 | 0.40 | r0-4.0 | T10 | 15.20 | 19.05 | 10.0 | 0.05 | 0.13 | IC908 IC903 | |
| MM HC160C16R0.8-2T10 | 16.00 | 2 | 14.90 | 0.80 | r0-4.0 | T10 | 15.15 | 19.05 | 10.0 | 0.05 | 0.13 | IC908 IC903 |