LNMX-HM
Tangential Inserts with a Positive Rake Angle for High Metal Removal on Soft and Ductile Materials(+)
| Designation | INSL | W1 | S | RE | IH | ft (min) |
ft (max) |
ap (min) |
ap (max) |
Tough ‹————› Hard Grade & Vc Click on Grade No. for Cutting Speed |
|
|---|---|---|---|---|---|---|---|---|---|---|---|
| LNMX 110408L-HM | 11.00 | 4.75 | 11.40 | 0.80 | L | 0.10 | 0.40 | 1.00 | 5.00 | IC6015 IC807 | |
| LNMX 110408R-HM | 11.00 | 4.75 | 11.40 | 0.80 | R | 0.10 | 0.40 | 1.00 | 5.00 | IC8250 IC6015 IC807 | |
| LNMX 110412L-HM | 11.00 | 4.75 | 11.40 | 1.20 | L | 0.10 | 0.40 | 1.00 | 5.00 | IC8250 | |
| LNMX 110412R-HM | 11.00 | 4.75 | 11.40 | 1.20 | R | 0.10 | 0.40 | 1.00 | 5.00 | IC6015 | |
| LNMX 150608L-HM | 15.00 | 6.40 | 13.40 | 0.80 | L | 0.10 | 0.50 | 1.00 | 6.00 | IC8250 IC806 IC907 | |
| LNMX 150608R-HM | 15.00 | 6.40 | 13.40 | 0.80 | R | 0.10 | 0.50 | 1.00 | 6.00 | IC8250 IC806 IC807 IC907 | |
| LNMX 150612L-HM | 15.00 | 6.40 | 13.40 | 1.20 | L | 0.15 | 0.70 | 1.50 | 7.00 | IC8250 IC806 IC907 | |
| LNMX 150612R-HM | 15.00 | 6.40 | 13.40 | 1.20 | R | 0.15 | 0.70 | 1.50 | 7.00 | IC8250 IC806 IC907 |