DPET R/L-GF
Precision positive ground 55 Rhombic inserts with sharphigh rake cutting edge for small parts super finishing of steel’ stainless steels & alloy steel
| Designation | IC | S | RE | ap (min) |
ap (max) |
ft (min) |
ft (max) |
Grade |
|---|---|---|---|---|---|---|---|---|
| DPET 0702003 L-GF | 6.35 | 2.38 | 0.03 | 0.20 | 1.50 | 0.01 | 0.15 | TT9020 |
| DPET 0702003 R-GF | 6.35 | 2.38 | 0.03 | 0.20 | 1.50 | 0.01 | 0.15 | TT9020 |
| DPET 070201 L-GF | 6.35 | 2.38 | 0.10 | 0.20 | 1.50 | 0.02 | 0.15 | TT9020 |
| DPET 070201 R-GF | 6.35 | 2.38 | 0.10 | 0.20 | 1.50 | 0.02 | 0.15 | TT9020 |
| DPET 070202 L-GF | 6.35 | 2.38 | 0.20 | 0.30 | 1.50 | 0.03 | 0.17 | TT9020 |
| DPET 070202 R-GF | 6.35 | 2.38 | 0.20 | 0.30 | 1.50 | 0.03 | 0.17 | TT9020 |
| DPET 11T3003 R-GF | 9.52 | 3.97 | 0.03 | 0.20 | 2.50 | 0.02 | 0.15 | TT9020 |
| DPET 11T301 L-GF | 9.52 | 3.97 | 0.10 | 0.20 | 2.50 | 0.02 | 0.15 | TT9020 |
| DPET 11T301 R-GF | 9.52 | 3.97 | 0.10 | 0.20 | 2.50 | 0.02 | 0.15 | TT9020 |
| DPET 11T302 L-GF | 9.52 | 3.97 | 0.20 | 0.30 | 2.50 | 0.03 | 0.17 | TT9020 |
| DPET 11T302 R-GF | 9.52 | 3.97 | 0.20 | 0.30 | 2.50 | 0.03 | 0.17 | TT9020 |