DNGA-CERAMIC
Negative 55 Rhombic ground Ceramic inserts with hole for cast iron & hardened steel machining
| Designation | IC | S | RE | ap (min) |
ap (max) |
ft (min) |
ft (max) |
Tough ‹————› Hard Grade & Vc Click on grade for cutting speed value |
|---|---|---|---|---|---|---|---|---|
| DNGA 150404 | 12.70 | 4.76 | 0.40 | 0.10 | 2.50 | 0.05 | 0.15 | AB30 AB20 |
| DNGA 150408 | 12.70 | 4.76 | 0.80 | 0.10 | 2.50 | 0.05 | 0.20 | AB30 AB20 AB2010 |
| DNGA 150408 S7 | 12.70 | 4.76 | 0.80 | 0.10 | 2.50 | 0.05 | 0.20 | AB2010 |
| DNGA 150412 | 12.70 | 4.76 | 1.20 | 0.10 | 2.50 | 0.05 | 0.25 | AB30 AB20 AB2010 |
| DNGA 150604 | 12.70 | 6.35 | 0.40 | 0.10 | 2.50 | 0.05 | 0.15 | AB30 AB20 AB2010 |
| DNGA 150608 | 12.70 | 6.35 | 0.80 | 0.10 | 2.50 | 0.05 | 0.20 | AS10 AB30 AB20 AB2010 |
| DNGA 150608 T5 | 12.70 | 6.35 | 0.80 | 0.10 | 2.50 | 0.05 | 0.20 | AB30 |
| DNGA 150612 | 12.70 | 6.35 | 1.20 | 0.10 | 2.50 | 0.05 | 0.25 | AS10 AB30 AB20 AB2010 |
| DNGA 150616 | 12.70 | 6.35 | 1.60 | 0.10 | 2.50 | 0.05 | 0.30 | AB30 AB20 |