DGN-UT/UA
Double-Sided Inserts for Parting and Grooving Cr-Ni Alloys’ Low Carbon Steel and Ductile Materials at Low Feeds(+)
| Designation | CW | CWTOL | RE | RETOL | CDX | INSL | fg (min) |
fg (max) |
Tough ‹————› Hard Grade & Vc Click on Grade No. for Cutting Speed |
|
|---|---|---|---|---|---|---|---|---|---|---|
| DGN 2202UA | 2.20 | 0.030 | 0.20 | 0.020 | 18.00 | 19.90 | 0.04 | 0.13 | IC328 IC1028 IC354 | |
| DGN 2202UT | 2.20 | 0.030 | 0.20 | 0.020 | 18.00 | 19.60 | 0.03 | 0.11 | IC350 IC908 | |
| DGN 3003UA | 3.00 | 0.030 | 0.25 | 0.020 | 18.00 | 20.50 | 0.04 | 0.15 | IC328 IC1030 IC1028 IC354 IC1010 IC308 IC20 | |
| DGN 3003UT | 3.00 | 0.030 | 0.25 | 0.020 | 18.00 | 20.50 | 0.04 | 0.13 | IC308 IC908 | |
| DGN 4003UA | 4.00 | 0.040 | 0.30 | 0.020 | – | 19.40 | 0.05 | 0.16 | IC328 IC354 | |
| DGN 4003UT | 4.00 | 0.040 | 0.30 | 0.020 | – | 19.30 | 0.04 | 0.15 | IC328 IC354 IC908 | |
| DGN 5003UT | 5.00 | 0.040 | 0.30 | 0.020 | – | 19.00 | 0.05 | 0.18 | IC328 IC1028 IC308 IC908 | |
| DGN 6008UT | 6.00 | 0.040 | 0.80 | 0.050 | – | 19.10 | 0.06 | 0.20 | IC328 IC354 IC308 IC908 |