CNGN-CERAMIC
Negative 80 Rhombic ground Ceramic inserts without hole for cast iron & hardened steel machining
| Designation | IC | S | RE | ap (min) |
ap (max) |
ft (min) |
ft (max) |
Tough ‹————› Hard Grade & Vc Click on grade for cutting speed value |
|---|---|---|---|---|---|---|---|---|
| CNGN 120408 T7 | 12.70 | 4.76 | 0.80 | 0.10 | 3.00 | 0.05 | 0.20 | AS500 |
| CNGN 120404 | 12.70 | 4.76 | 0.40 | 0.10 | 3.00 | 0.05 | 0.15 | AB30 |
| CNGN 120404 T6 | 12.70 | 4.76 | 0.40 | 0.10 | 3.00 | 0.05 | 0.15 | TC430 |
| CNGN 120408 | 12.70 | 4.76 | 0.80 | 0.10 | 3.00 | 0.05 | 0.20 | AS10 AB30 AB20 AB2010 |
| CNGN 120408 E | 12.70 | 4.76 | 0.80 | 0.10 | 3.00 | 0.05 | 0.20 | TC3030 TC3020 |
| CNGN 120408 T6 | 12.70 | 4.76 | 0.80 | 0.10 | 3.00 | 0.05 | 0.20 | TC3030 TC3020 TC430 |
| CNGN 120412 E | 12.70 | 4.76 | 1.20 | 0.10 | 3.00 | 0.05 | 0.25 | TC3030 TC430 |
| CNGN 120412 T6 | 12.70 | 4.76 | 1.20 | 0.10 | 3.00 | 0.05 | 0.25 | TC3020 TC430 |
| CNGN 120412 T7 | 12.70 | 4.76 | 1.20 | 0.10 | 3.00 | 0.05 | 0.25 | AW120 |
| CNGN 120416 T6 | 12.70 | 4.76 | 1.60 | 0.10 | 3.00 | 0.05 | 0.30 | TC430 |
| CNGN 120716 T7 | 12.70 | 7.94 | 1.60 | 0.10 | 3.00 | 0.05 | 0.30 | AW120 |
| CNGN 120708 | 12.70 | 7.94 | 0.80 | 0.10 | 3.00 | 0.05 | 0.20 | AB30 AB20 AB2010 |
| CNGN 120708 E | 12.70 | 7.94 | 0.80 | 0.10 | 3.00 | 0.05 | 0.20 | TC3030 TC3020 |
| CNGN 120708 T6 | 12.70 | 7.94 | 0.80 | 0.10 | 3.00 | 0.05 | 0.20 | TC3030 TC3020 TC430 |
| CNGN 120712 | 12.70 | 7.94 | 1.20 | 0.10 | 3.00 | 0.05 | 0.25 | AS10 AB30 |
| CNGN 120712 E | 12.70 | 7.94 | 1.20 | 0.10 | 3.00 | 0.05 | 0.25 | TC3030 TC3020 |
| CNGN 120712 T6 | 12.70 | 7.94 | 1.20 | 0.10 | 3.00 | 0.05 | 0.25 | TC3020 TC430 |
| CNGN 120712 T7 | 12.70 | 7.94 | 1.20 | 0.10 | 3.00 | 0.05 | 0.25 | AW120 |
| CNGN 120716 | 12.70 | 7.94 | 1.60 | 0.10 | 3.00 | 0.05 | 0.30 | SC10 AB30 |
| CNGN 120716 T6 | 12.70 | 7.94 | 1.60 | 0.10 | 3.00 | 0.05 | 0.30 | TC3030 TC3020 |