CCGW-PCD
Positive 80 Rhombic inserts with single PCD tip of positive rake angle for finishing of non-ferrous metal & aluminum
| Designation | LE | IC | S | RE | ap (min) |
ap (max) |
ft (min) |
ft (max) |
Tough ‹————› Hard Grade & Vc Click on grade for cutting speed value |
|---|---|---|---|---|---|---|---|---|---|
| CCGW 060202 LN-7 | 3.10 | 6.35 | 2.38 | 0.20 | 0.08 | 0.30 | 0.05 | 0.30 | TD810 KP300 |
| CCGW 060204 LN-7 | 3.10 | 6.35 | 2.38 | 0.40 | 0.08 | 0.30 | 0.05 | 0.30 | KP300 |
| CCGW 09T304 LN-7 | 4.00 | 9.52 | 3.97 | 0.40 | 0.10 | 0.30 | 0.05 | 0.30 | TD810 KP300 |
| CCGW 09T308 LN-7 | 3.90 | 9.52 | 3.97 | 0.80 | 0.10 | 3.00 | 0.05 | 0.30 | TD810 KP300 |
| CCGW 120404 LN-7 | 4.00 | 12.70 | 4.76 | 0.40 | 0.10 | 3.00 | 0.05 | 0.30 | KP300 |
| CCGW 120408 LN-7 | 3.90 | 12.70 | 4.76 | 0.80 | 0.10 | 3.00 | 0.05 | 0.30 | TD810 KP300 |