80.6532KR1809DW02I3X100Z162 - Radial drill. and mill. head offset, For collet 320 470E (ER32 Ø3-20), with tapered roller bearing, Similar to DIN 1809 drive, External coolant supply, i = 3:1 same rotating direction, tool length, Z = 162mm,
Article number: 164140Radial drilling and milling head reset
Premium class tooling system for highest production efficiency - Made in Germany
Collet chuck ER32 DIN6499
- Clamping range Ø3-20
- For collet 320 470E
- When tightening the clamping nut, it is essential to counterhold the tool spindle.
- Failure to observe the counter-hold can result in damage to the gearbox or drive coupling.
- Maximum tightening torque: 120 Nm
Tapered roller bearings (KR) - extraordinarily loadable.
- Recommended for machining operations with high torques (e.g.: milling operations with large diameters, threading operations, interrupted cut machining)
- Increase of tool life
- Reduction of service intervals
- Simultaneous radial and axial loads can be easily absorbed
Загрузить PDF
| Functional length (LF) | 83.00 mm |
|---|---|
| Total height (OAH) | 93.00 mm |
| Number of holders, workpiece side (CCONWS) | 1 |
| Max. torque (TQX) | 40.00 Nm |
| Max. rotational speed, input (RPMX) | 6000 min-1 |
| Transmission relation (TR) | 2,878:1 |
| Transmission torque, output drive 1 (DINH201) | 120.00 Nm |
| Shank size | BMT65 |
| Interface size | Collet ER32 |
| Coolant intake | Outer cooling |
| Coupling | Surface coupling |
| Alignment system | BMT – keyway |
| Article number | 164140 |
|---|---|
| Product weight | 13.506 KG |