60.8550KR1809I2GLX110 - Radial drilling and milling head, For collet 500 477E (ER50 Ø12-34), with tapered roller bearing, DIN 1809 drive, External coolant supply, i = 2:1 same rotating direction, X = 110mm,
Article number: 151488Radial drilling and milling head
Premium class tool system for highest production efficiency - Made in Germany
Collet chuck ER50 DIN6499
- Clamping range Ø12-34
- For collet 500 477E
- When tightening the clamping nut, it is essential to counterhold the tool spindle.
- Failure to observe the counterholding may result in damage to the gearbox or drive coupling.
- Maximum tightening torque: 220 Nm
Tapered roller bearings (KR) - extraordinarily loadable.
- Recommended for machining operations with high torques (e.g.: milling operations with large diameters, threading operations, interrupted cut machining)
- Increase of tool life
- Reduction of service intervals
- Simultaneous radial and axial loads can be easily absorbed
Загрузить PDF
| Functional length (LF) | 110.00 mm |
|---|---|
| Total height (OAH) | 125.00 mm |
| Number of holders, workpiece side (CCONWS) | 1 |
| Max. torque (TQX) | 80.00 Nm |
| Max. rotational speed, input (RPMX) | 4000 min-1 |
| Transmission relation (TR) | 2:1 |
| Transmission torque, output drive 1 (DINH201) | 160.00 Nm |
| Shank size | BMT85 |
| Interface size | Collet ER50 |
| Coolant intake | Outer cooling |
| Coupling | Surface coupling |
| Alignment system | BMT – keyway |
| Article number | 151488 |
|---|---|
| Product weight | 19.864 KG |