60.85501809IKGLX95 - Radial drilling and milling head, For collet 500 477E (ER50 Ø12-34), DIN 1809 drive, Int. / ext. coolant pmax = 70bar, i = 1:1 (input equal output), X = 95mm,
Article number: 166096Radial drilling and milling head
Premium class tool system for highest production efficiency - Made in Germany
Collet chuck ER50 DIN6499
- Clamping range Ø12-34
- For collet 500 477E
- When tightening the clamping nut, it is essential to counterhold the tool spindle.
- Failure to observe the counterholding may result in damage to the gearbox or drive coupling.
- Maximum tightening torque: 220 Nm
Internal cooling
Equipped with high-quality seal kits that can withstand coolant pressure of up to 70 bar.
- 70 bar maximum coolant pressure
- Not capable of dry running
- Change between external and internal cooling possible
- Coolant must be applied to the tool at all times
Загрузить PDF
| Functional length (LF) | 95.00 mm |
|---|---|
| Total height (OAH) | 125.00 mm |
| Number of holders, workpiece side (CCONWS) | 1 |
| Max. torque (TQX) | 100.00 Nm |
| Max. rotational speed, input (RPMX) | 4000 min-1 |
| Transmission relation (TR) | 1:1 |
| Transmission torque, output drive 1 (DINH201) | 100.00 Nm |
| Shank size | BMT85 |
| Interface size | Collet ER50 |
| Coolant intake | Inner and outer cooling |
| Coupling | Surface coupling |
| Alignment system | BMT – keyway |
| Article number | 166096 |
|---|---|
| Product weight | 21.444 KG |