60.6532KR1809PFGLIM - Radial drilling and milling head, For collet 320 470E (ER32 Ø3-20), with tapered roller bearing, DIN1809 performance/flexible clutch, External coolant supply, i = 1:1 (input equal output), inside collet nut, Butterfly-Seal, cool.manag., polyg.

Article number: 225978
Radial drilling and milling head
Premium class tool system for highest production efficiency - Made in Germany
Collet chuck ER32 DIN6499
Clamping range Ø3-20
For collet 320 470E
When tightening the clamping nut, it is essential to counterhold the tool spindle.
Failure to observe the counter-hold can result in damage to the gearbox or drive coupling.
Maximum tightening torque: 120 Nm
Tapered roller bearings (KR) - extraordinarily loadable.
Recommended for machining operations with high torques (e.g.: milling operations with large diameters, threading operations, interrupted cut machining)
Increase of tool life
Reduction of service intervals
Simultaneous radial and axial loads can be easily absorbed
Polygonal shaft hub connection
The latest series of our tool systems are equipped with polygonal shaft hub connections. Compared to tool holders with key connections, there are clear technological advantages:
Reduced vibrations of the tool spindle
Significantly increased power transmission
Less gear backlash
EWS.Butterfly-Seal - sealing technology in a class of its own
Speed-related lift-off function of the sealing element
No friction-induced running-in of the spindle
Reduced mold heating by up to 50%
Effective protection against cooling emulsion and dirt particles
Lower repair costs
EWS.Coolant Management - simply clever
Opening and closing of external cooling with just one turn
Coolant flow adjustable
Time saving due to easy handling

Загрузить PDF