60.45201809IKGLIM - Radial drilling and milling head, For collet 200 428E (ER20 Ø2-13), DIN 1809 drive, Int. / ext. coolant pmax = 70bar, i = 1:1 (input equal output), inside collet nut,
Article number: 159272Radial drilling and milling head
Premium class tool system for highest production efficiency - Made in Germany
Collet chuck ER20 DIN6499
- Clamping range Ø2-13
- For collet 200 428E
- When tightening the clamping nut, it is essential to counterhold the tool spindle.
- Failure to observe the counterholding may result in damage to the gearbox or drive coupling.
- Maximum tightening torque: 75 Nm
Internal cooling
Equipped with high-quality seal kits that can withstand coolant pressure of up to 70 bar.
- 70 bar maximum coolant pressure
- Not capable of dry running
- Change between external and internal cooling possible
- Coolant must be applied to the tool at all times
Загрузить PDF
| Functional length (LF) | 65.00 mm |
|---|---|
| Total height (OAH) | 75.00 mm |
| Number of holders, workpiece side (CCONWS) | 1 |
| Max. torque (TQX) | 25.00 Nm |
| Max. rotational speed, input (RPMX) | 6000 min-1 |
| Transmission relation (TR) | 1:1 |
| Transmission torque, output drive 1 (DINH201) | 25.00 Nm |
| Shank size | BMT45 |
| Interface size | Collet ER20 |
| Coolant intake | Inner and outer cooling |
| Coupling | Surface coupling |
| Alignment system | BMT – keyway |
| Article number | 159272 |
|---|---|
| Product weight | 5.059 KG |