60.4020HYDCTXRLIKTKW58 - Radial drilling and milling head, Hydraulic chuck Ø 20, DIN 5480 drive, Int. / ext. coolant pmax = 70bar, i =1:1 direction of rotation inver., fixed angle of 58°,
Article number: 193635Загрузить PDFRadial drilling and milling head
Premium class tool system for highest production efficiency - Made in Germany
Hyrodehn interface
- High precision clamping
- Optimum concentricity of the tool cutting edge
- Good damping against vibrations and chatter
- Reducing sleeves available to adjust the clamping diameter
- Clamping of the cutting edge by only one screw
- No additional fixture necessary
- Observe tightening torque
Double toothing (Traub license)
- VDI shank double toothed.
- Tool holder can be rotated 180°.
- Note: Rotatability may be restricted by alignment systems (e.g. Trifix).
Internal cooling
Equipped with high-quality seal kits that can withstand coolant pressure of up to 70 bar.
- 70 bar maximum coolant pressure
- Not capable of dry running
- Change between external and internal cooling possible
- Coolant must be applied to the tool at all times
| Number of holders, workpiece side (CCONWS) | 1 |
|---|---|
| Max. torque (TQX) | 50.00 Nm |
| Max. rotational speed, input (RPMX) | 6000 min-1 |
| Transmission relation (TR) | 1:1 |
| Transmission torque, output drive 1 (DINH201) | 50.00 Nm |
| Shank size | VDI40 |
| Interface size | Hydraulic chuck Ø 20.0 |
| Coolant intake | Inner and outer cooling |
| Coupling | DIN 5480 |
| Alignment system | Pin (Bar) |
| Article number | 193635 |
|---|---|
| Product weight | 6.619 KG |