60.3025KRLB10LIKI3 - Radial drilling and milling head, For collet 250 430E (ER25 Ø2-16), with tapered roller bearing, Coupling LB 10/LB200, Int. / ext. coolant pmax = 70bar, i =3:1 direction of rotation inver.,
Article number: 129397Загрузить PDFRadial drilling and milling head
Premium class tool system for highest production efficiency - Made in Germany
Collet chuck ER25 DIN6499
- Clamping range Ø2-16
- For collet 250 430E
- When tightening the clamping nut, it is essential to counterhold the tool spindle.
- Failure to observe the counterholding may result in damage to the gearbox or drive coupling.
- Maximum tightening torque: 90 Nm
Tapered roller bearings (KR) - extraordinarily loadable.
- Recommended for machining operations with high torques (e.g.: milling operations with large diameters, threading operations, interrupted cut machining)
- Increase of tool life
- Reduction of service intervals
- Simultaneous radial and axial loads can be easily absorbed
Internal cooling
Equipped with high-quality seal kits that can withstand coolant pressure of up to 70 bar.
- 70 bar maximum coolant pressure
- Not capable of dry running
- Change between external and internal cooling possible
- Coolant must be applied to the tool at all times
| Functional length (LF) | 55.00 mm |
|---|---|
| Total height (OAH) | 64.00 mm |
| Number of holders, workpiece side (CCONWS) | 1 |
| Max. torque (TQX) | 20.00 Nm |
| Max. rotational speed, input (RPMX) | 6000 min-1 |
| Transmission relation (TR) | 3:1 |
| Transmission torque, output drive 1 (DINH201) | 60.00 Nm |
| Shank size | VDI30 |
| Interface size | Collet ER25 |
| Coolant intake | Inner and outer cooling |
| Coupling | Claw coupling |
| Alignment system | Pin (Bar) |
| Article number | 129397 |
|---|---|
| Product weight | 3.6 KG |