50.5516TW10IKGLI13IM - Ax. drill. and mill. head offset, For collet 160 426E (ER16 Ø1-10), Similar to DIN 1809 drive, Int. / ext. coolant pmax = 70bar, i = 1:3 (input equal output), inside collet nut,
Article number: 200217Axial drilling and milling head with offset axes
Premium class tooling system for highest production efficiency - Made in Germany
Collet chuck ER16 DIN6499
- Clamping range Ø1-10
- For collet 160 426E
- When tightening the clamping nut, it is essential to counterhold the tool spindle.
- Failure to observe the counterholding may result in damage to the gearbox or drive coupling.
- Maximum tightening torque: 50 Nm
Internal cooling
Equipped with high-quality seal kits that can withstand coolant pressure of up to 70 bar.
- 70 bar maximum coolant pressure
- Not capable of dry running
- Change between external and internal cooling possible
- Coolant must be applied to the tool at all times
Загрузить PDF
Total height (OAH) | 82.00 mm |
---|---|
Number of holders, workpiece side (CCONWS) | 1 |
Max. torque (TQX) | 15.00 Nm |
Max. rotational speed, input (RPMX) | 6000 min-1 |
Transmission relation (TR) | 1:3 |
Transmission torque, output drive 1 (DINH201) | 5.00 Nm |
Shank size | BMT55C |
Interface size | Collet ER16 |
Coolant intake | Inner and outer cooling |
Coupling | Surface coupling |
Alignment system | BMT – keyway |
Article number | 200217 |
---|---|
Product weight | 5.17 KG |