40.6532KRVL6FIM - Axial drilling and milling head, For collet 320 470E (ER32 Ø3-20), with tapered roller bearing, External coolant supply, i = 1:1 (input equal output), inside collet nut, Butterfly-Seal, coolant management
Article number: 229080Axial drilling and milling head
Premium class tool system for highest production efficiency - Made in Germany
Collet chuck ER32 DIN6499
- Clamping range Ø3-20
- For collet 320 470E
- When tightening the clamping nut, it is essential to counterhold the tool spindle.
- Failure to observe the counter-hold can result in damage to the gearbox or drive coupling.
- Maximum tightening torque: 120 Nm
Tapered roller bearings (KR) - extraordinarily loadable.
- Recommended for machining operations with high torques (e.g.: milling operations with large diameters, threading operations, interrupted cut machining)
- Increase of tool life
- Reduction of service intervals
- Simultaneous radial and axial loads can be easily absorbed
EWS.Butterfly-Seal - sealing technology in a class of its own
- Speed-related lift-off function of the sealing element
- No friction-induced running-in of the spindle
- Reduced mold heating by up to 50%
- Effective protection against cooling emulsion and dirt particles
- Lower repair costs
EWS.Coolant Management - simply clever
- Opening and closing of external cooling with just one turn
- Coolant flow adjustable
- Time saving due to easy handling
Загрузить PDF
| Total height (OAH) | 97.00 mm |
|---|---|
| Number of holders, workpiece side (CCONWS) | 1 |
| Max. torque (TQX) | 80.00 Nm |
| Max. rotational speed, input (RPMX) | 5000 min-1 |
| Transmission relation (TR) | 1:1 |
| Transmission torque, output drive 1 (DINH201) | 80.00 Nm |
| Shank size | BMT65 |
| Interface size | Collet ER32 |
| Coolant intake | Outer cooling |
| Coupling | Surface coupling |
| Alignment system | BMT – keyway |
| Article number | 229080 |
|---|