40.6040KRTOEMIK - Axial drilling and milling head, For collet 400 472E (ER40 Ø4-26), with tapered roller bearing, Int. / ext. coolant pmax = 25bar, i = 1:1 (input equal output),
Article number: 129863Загрузить PDFAxial drilling and milling head
Premium class tool system for highest production efficiency - Made in Germany
Collet chuck ER40 DIN6499
- Clamping range Ø4-26
- For collet 400 472E
- When tightening the clamping nut, it is essential to counterhold the tool spindle.
- Failure to observe the counterholding may result in damage to the gearbox or drive coupling.
- Maximum tightening torque: 160 Nm
Tapered roller bearings (KR) - extraordinarily loadable.
- Recommended for machining operations with high torques (e.g.: milling operations with large diameters, threading operations, interrupted cut machining)
- Increase of tool life
- Reduction of service intervals
- Simultaneous radial and axial loads can be easily absorbed
Internal cooling
Equipped with high-quality seal kits that can withstand coolant pressure of up to 25 bar.
- 25 bar maximum coolant pressure
- Not capable of dry running
- Change between external and internal cooling possible
- Coolant must be applied to the tool at all times
| Total height (OAH) | 104.00 mm |
|---|---|
| Number of holders, workpiece side (CCONWS) | 1 |
| Max. torque (TQX) | 160.00 Nm |
| Max. rotational speed, input (RPMX) | 3000 min-1 |
| Transmission relation (TR) | 1:1 |
| Transmission torque, output drive 1 (DINH201) | 160.00 Nm |
| Shank size | VDI60 |
| Interface size | ER40 |
| Coolant intake | Inner and outer cooling |
| Coupling | Claw coupling |
| Article number | 129863 |
|---|---|
| Product weight | 9.567 KG |