MM EA-CF
Interchangeable Solid Carbide Endmill Heads with Different Helix for Machining Aluminum(+)
| Designation | DC | NOF | APMX | RE | THSZMS | DCONMS | LF | FHA | fz (min) |
fz (max) |
Grade Click on Grade No. for Cutting Speed | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MM EA080H08R0CF-4T05 | 8.00 | 4 | 8.00 | 0.00 | T05 | 7.70 | 15.00 | 40.0 | 0.03 | 0.09 | IC08 | |
| MM EA100H10R0CF-4T06 | 10.00 | 4 | 10.00 | 0.00 | T06 | 9.60 | 19.00 | 40.0 | 0.03 | 0.10 | IC08 | |
| MM EA120H12R0.2CF-3T08 | 12.00 | 3 | 12.00 | 0.20 | T08 | 11.70 | 23.00 | 40.0 | 0.04 | 0.11 | IC08 | |
| MM EA120H12R0CF-4T08 | 12.00 | 4 | 12.00 | 0.00 | T08 | 11.70 | 23.00 | 40.0 | 0.04 | 0.11 | IC08 | |
| MM EA160H16R0.0CF-3T10 | 16.00 | 3 | 16.00 | 0.00 | T10 | 15.30 | 28.00 | 40.0 | 0.05 | 0.13 | IC08 | |
| MM EA160H16R0.2CF-3T10 | 16.00 | 3 | 16.00 | 0.20 | T10 | 15.30 | 28.00 | 40.0 | 0.05 | 0.13 | IC08 | |
| MM EA160H16R0.5CF-3T10 | 16.00 | 3 | 16.00 | 0.50 | T10 | 15.30 | 28.00 | 40.0 | 0.05 | 0.13 | IC08 | |
| MM EA160H16R2.5CF-3T10 | 16.00 | 3 | 16.00 | 2.50 | T10 | 15.30 | 28.00 | 40.0 | 0.05 | 0.13 | IC08 | |
| MM EA160H16R0CF-4T10 | 16.00 | 4 | 16.00 | 0.00 | T10 | 15.30 | 26.00 | 40.0 | 0.05 | 0.12 | IC08 | |
| MM EA200H20R0.0CF-3T12 | 20.00 | 3 | 20.00 | 0.00 | T12 | 18.45 | 34.00 | 40.0 | 0.05 | 0.13 | IC08 | |
| MM EA200H20R0.2CF-3T12 | 20.00 | 3 | 20.00 | 0.20 | T12 | 18.45 | 34.00 | 40.0 | 0.05 | 0.13 | IC08 | |
| MM EA200H20R0.5CF-3T12 | 20.00 | 3 | 20.00 | 0.50 | T12 | 18.45 | 34.00 | 40.0 | 0.05 | 0.13 | IC08 | |
| MM EA200H20R2.5CF-3T12 | 20.00 | 3 | 20.00 | 2.50 | T12 | 18.45 | 34.00 | 40.0 | 0.05 | 0.13 | IC08 | |
| MM EA250H19R0.5-3T15 | 25.00 | 3 | 19.00 | 0.50 | T15 | 23.90 | 37.00 | 40.0 | 0.06 | 0.16 | IC08 | |
| MM EA250H19R1.0-3T15 | 25.00 | 3 | 19.00 | 1.00 | T15 | 23.90 | 37.00 | 40.0 | 0.06 | 0.16 | IC08 | |
| MM EA250H19R3.0-3T15 | 25.00 | 3 | 19.00 | 3.00 | T15 | 23.90 | 37.00 | 40.0 | 0.06 | 0.16 | IC08 |