EC-D6
6 Flute’ 50 Helix Medium Length Solid Carbide Endmills for Finishing of Hard Materials up to 65 HRC(+)
| Designation | DC | DCONMS | APMX | OAL | NOF | FHA | Shank | RMPX° | fz (min) |
fz (max) |
Grade Click on Grade No. for Cutting Speed | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| EC-D6 06-13C06H57 | 6.00 | 6.00 | 13.00 | 57.00 | 6 | 50.0 | C | 5.0 | 0.03 | 0.07 | IC903 | |
| EC-D6 08-20C08H63 | 8.00 | 8.00 | 20.00 | 63.00 | 6 | 50.0 | C | 5.0 | 0.03 | 0.09 | IC903 | |
| EC-D6 10-22C10H72 | 10.00 | 10.00 | 22.00 | 72.00 | 6 | 50.0 | C | 5.0 | 0.03 | 0.10 | IC903 | |
| EC-D6 12-25C12H83 | 12.00 | 12.00 | 25.00 | 83.00 | 6 | 50.0 | C | 5.0 | 0.04 | 0.11 | IC903 | |
| EC-D6 12-25W12H83 | 12.00 | 12.00 | 25.00 | 83.00 | 6 | 50.0 | W | 5.0 | 0.04 | 0.11 | IC903 | |
| EC-D6 14-30C14H83 | 14.00 | 14.00 | 30.00 | 83.00 | 6 | 50.0 | C | 5.0 | 0.04 | 0.12 | IC903 | |
| EC-D6 16-32C16H92 | 16.00 | 16.00 | 32.00 | 92.00 | 6 | 50.0 | C | 5.0 | 0.05 | 0.13 | IC903 | |
| EC-D6 20-38C20H104 | 20.00 | 20.00 | 38.00 | 104.00 | 6 | 50.0 | C | 5.0 | 0.05 | 0.13 | IC903 |