60.4032DNZIKHSD10 - Radial drilling and milling head, For collet 320 470E (ER32 Ø3-20), double spindle, Similar to DIN 1809 drive, Int. / ext. coolant pmax = 25bar, Highspeed till 10000 1/min,
Article number: 205198Radial drilling and milling head
Premium class tool system for highest production efficiency - Made in Germany
Collet chuck ER32 DIN6499
- Clamping range Ø3-20
- For collet 320 470E
- When tightening the clamping nut, it is essential to counterhold the tool spindle.
- Failure to observe the counter-hold can result in damage to the gearbox or drive coupling.
- Maximum tightening torque: 120 Nm
Internal cooling
Equipped with high-quality seal kits that can withstand coolant pressure of up to 25 bar.
- 25 bar maximum coolant pressure
- Not capable of dry running
- Change between external and internal cooling possible
- Coolant must be applied to the tool at all times
Highspeed
- High precision spindle bearings
- Lower heat generation at high speeds
- Not suitable for heavy machining
- Observe maximum permissible speed
Загрузить PDF
| Total height (OAH) | 78.00 mm |
|---|---|
| Number of holders, workpiece side (CCONWS) | 2 |
| Max. torque (TQX) | 32.00 Nm |
| Max. rotational speed, input (RPMX) | 10000 min-1 |
| Transmission relation (TR) | 1:1 |
| Transmission torque, output drive 1 (DINH201) | 32.00 Nm |
| Transmission torque 2 (DINH202) | 32.00 Nm |
| Shank size | BMT40 DMG Mori |
| Interface size | Collet ER32 |
| Coolant intake | Inner and outer cooling |
| Coupling | Surface coupling |
| Alignment system | BMT – keyway |
| Article number | 205198 |
|---|---|
| Product weight | 8.018 KG |