50.6025LB2000BMTIKDGLIMHSP - Ax. drill. and mill. head offset, For collet 250 430E (ER25 Ø2-16), Coupling OKUMA LB2000, Block tool, IC/EC Ceramic pmax = 70bar, i = 1:1 (input equal output), inside collet nut, main spindle,
Article number: 228565Axial drilling and milling head with offset axes
Premium class tooling system for highest production efficiency - Made in Germany
Collet chuck ER25 DIN6499
- Clamping range Ø2-16
- For collet 250 430E
- When tightening the clamping nut, it is essential to counterhold the tool spindle.
- Failure to observe the counterholding may result in damage to the gearbox or drive coupling.
- Maximum tightening torque: 90 Nm
EWS.HPC-Line (IKC/IKD) - Sealing technology sets standards
- Ceramic based sealing elements
- 0 - 70 bar coolant pressure
- Dry running capability without restrictions
- Speeds up to 12,000/min
- Up to 60% reduced heat generation
- Long service life - low maintenance costs
- Seal kit for the latest generation of internal coolant supply systems
Загрузить PDF
| Total height (OAH) | 90.00 mm |
|---|---|
| Number of holders, workpiece side (CCONWS) | 1 |
| Max. torque (TQX) | 50.00 Nm |
| Max. rotational speed, input (RPMX) | 6000 min-1 |
| Transmission relation (TR) | 1:1 |
| Transmission torque, output drive 1 (DINH201) | 50.00 Nm |
| Shank size | BMT60B Okuma |
| Interface size | Collet ER25 |
| Coolant intake | Inner and outer cooling |
| Coupling | Surface coupling |
| Alignment system | BMT – keyway |
| Article number | 228565 |
|---|