60.6050KRNEX315IKI2 - Radial drilling and milling head, For collet 500 477E (ER50 Ø12-34), with tapered roller bearing, Takisawa NEX315, Block tool, Int. / ext. coolant pmax = 70bar, i =2:1 direction of rotation inver.,
Article number: 175392Radial drilling and milling head
Premium class tool system for highest production efficiency - Made in Germany
Collet chuck ER50 DIN6499
- Clamping range Ø12-34
- For collet 500 477E
- When tightening the clamping nut, it is essential to counterhold the tool spindle.
- Failure to observe the counterholding may result in damage to the gearbox or drive coupling.
- Maximum tightening torque: 220 Nm
Tapered roller bearings (KR) - extraordinarily loadable.
- Recommended for machining operations with high torques (e.g.: milling operations with large diameters, threading operations, interrupted cut machining)
- Increase of tool life
- Reduction of service intervals
- Simultaneous radial and axial loads can be easily absorbed
Internal cooling
Equipped with high-quality seal kits that can withstand coolant pressure of up to 70 bar.
- 70 bar maximum coolant pressure
- Not capable of dry running
- Change between external and internal cooling possible
- Coolant must be applied to the tool at all times
Загрузить PDF
| Functional length (LF) | 90.00 mm |
|---|---|
| Total height (OAH) | 115.00 mm |
| Number of holders, workpiece side (CCONWS) | 1 |
| Max. torque (TQX) | 80.00 Nm |
| Max. rotational speed, input (RPMX) | 6000 min-1 |
| Transmission relation (TR) | 2:1 |
| Transmission torque, output drive 1 (DINH201) | 160.00 Nm |
| Shank size | BMT60B Takisawa-Taiwan |
| Interface size | Collet ER50 |
| Coolant intake | Inner and outer cooling |
| Coupling | Surface coupling |
| Alignment system | BMT – keyway (adjustable) |
| Article number | 175392 |
|---|---|
| Product weight | 14.69 KG |