60.5512WNKRTW10IK - Radial drilling and milling head, Whistle Notch/Weldon Ø12, with tapered roller bearing, Similar to DIN 1809 drive, Int. / ext. coolant pmax = 70bar, i =1:1 direction of rotation inver.,
Article number: 147436Radial drilling and milling head
Premium class tool system for highest production efficiency - Made in Germany
Tapered roller bearings (KR) - extraordinarily loadable.
- Recommended for machining operations with high torques (e.g.: milling operations with large diameters, threading operations, interrupted cut machining)
- Increase of tool life
- Reduction of service intervals
- Simultaneous radial and axial loads can be easily absorbed
Internal cooling
Equipped with high-quality seal kits that can withstand coolant pressure of up to 70 bar.
- 70 bar maximum coolant pressure
- Not capable of dry running
- Change between external and internal cooling possible
- Coolant must be applied to the tool at all times
Загрузить PDF
| Functional length (LF) | 70.00 mm |
|---|---|
| Total height (OAH) | 82.00 mm |
| Number of holders, workpiece side (CCONWS) | 1 |
| Max. torque (TQX) | 25.00 Nm |
| Max. rotational speed, input (RPMX) | 5000 min-1 |
| Transmission relation (TR) | 1:1 |
| Transmission torque, output drive 1 (DINH201) | 25.00 Nm |
| Shank size | BMT55C |
| Interface size | Weldon Ø 12.0 Whistle Notch Ø 12.0 |
| Coolant intake | Inner and outer cooling |
| Coupling | Surface coupling |
| Alignment system | BMT – keyway |
| Article number | 147436 |
|---|---|
| Product weight | 4.531 KG |