63.4020NZX85 - Swivel head, For collet 200 428E (ER20 Ø2-13), Similar to DIN 1809 drive, External coolant supply, i = 1:1 (input equal output), X = 85mm,
Article number: 158788Swivel head
Swivel heads are suitable for machining at special angles. The stepless adjustability of the angle makes the application extremely flexible, which is also the decisive advantage compared to fixed angle heads.
- Stepless angle adjustment - up to +/- 105°, depending on the design.
- Neighbor station can be omitted due to the design
- Not suitable for heavy machining
- Not suitable for series production
Premium class tool system for highest production efficiency - Made in Germany
Collet chuck ER20 DIN6499
- Clamping range Ø2-13
- For collet 200 428E
- When tightening the clamping nut, it is essential to counterhold the tool spindle.
- Failure to observe the counterholding may result in damage to the gearbox or drive coupling.
- Maximum tightening torque: 75 Nm
Загрузить PDF
| Number of holders, workpiece side (CCONWS) | 1 |
|---|---|
| Max. torque (TQX) | 16.00 Nm |
| Max. rotational speed, input (RPMX) | 6000 min-1 |
| Transmission relation (TR) | 1:1 |
| Transmission torque, output drive 1 (DINH201) | 16.00 Nm |
| Shank size | BMT40 DMG Mori |
| Interface size | Collet ER20 |
| Coolant intake | Outer cooling |
| Coupling | Surface coupling |
| Alignment system | BMT – keyway |
| Article number | 158788 |
|---|---|
| Product weight | 4.234 KG |