40.6512HYDTW20IK - Axial drilling and milling head, Hydraulic chuck Ø 12, Int. / ext. coolant pmax = 25bar, i = 1:1 (input equal output),
Article number: 148533Axial drilling and milling head
Premium class tool system for highest production efficiency - Made in Germany
Hyrodehn interface
- High precision clamping
- Optimum concentricity of the tool cutting edge
- Good damping against vibrations and chatter
- Reducing sleeves available to adjust the clamping diameter
- Clamping of the cutting edge by only one screw
- No additional fixture necessary
- Observe tightening torque
Internal cooling
Equipped with high-quality seal kits that can withstand coolant pressure of up to 25 bar.
- 25 bar maximum coolant pressure
- Not capable of dry running
- Change between external and internal cooling possible
- Coolant must be applied to the tool at all times
Загрузить PDF
| Total height (OAH) | 94.00 mm |
|---|---|
| Number of holders, workpiece side (CCONWS) | 1 |
| Max. torque (TQX) | 50.00 Nm |
| Max. rotational speed, input (RPMX) | 6000 min-1 |
| Transmission relation (TR) | 1:1 |
| Transmission torque, output drive 1 (DINH201) | 50.00 Nm |
| Shank size | BMT65B |
| Interface size | Hydraulic chuck Ø 12.0 |
| Coolant intake | Inner and outer cooling |
| Coupling | Surface coupling |
| Article number | 148533 |
|---|---|
| Product weight | 3.707 KG |