50.55201809N4IKI1IM - Ax. drill. and mill. head offset, For collet 200 428E (ER20 Ø2-13), Similar to DIN 1809 drive, Int. / ext. coolant pmax = 70bar, i =1:2 direction of rotation inver., inside collet nut,
Article number: 139999Axial drilling and milling head with offset axes
Premium class tooling system for highest production efficiency - Made in Germany
Collet chuck ER20 DIN6499
- Clamping range Ø2-13
- For collet 200 428E
- When tightening the clamping nut, it is essential to counterhold the tool spindle.
- Failure to observe the counterholding may result in damage to the gearbox or drive coupling.
- Maximum tightening torque: 75 Nm
Internal cooling
Equipped with high-quality seal kits that can withstand coolant pressure of up to 70 bar.
- 70 bar maximum coolant pressure
- Not capable of dry running
- Change between external and internal cooling possible
- Coolant must be applied to the tool at all times
Загрузить PDF
| Total height (OAH) | 85.00 mm |
|---|---|
| Number of holders, workpiece side (CCONWS) | 1 |
| Max. torque (TQX) | 24.00 Nm |
| Max. rotational speed, input (RPMX) | 6000 min-1 |
| Transmission relation (TR) | 1:2 |
| Transmission torque, output drive 1 (DINH201) | 12.00 Nm |
| Shank size | BMT55 |
| Interface size | Collet ER20 |
| Coolant intake | Inner and outer cooling |
| Coupling | Surface coupling |
| Alignment system | BMT – keyway |
| Article number | 139999 |
|---|---|
| Product weight | 4.755 KG |