60.3211TSL200BMTI1TK32 - Radial drilling and milling head, For collet 110 4008E (ER11 Ø1-7), Three spindles, Similar to DIN 1809 drive, External coolant supply, i =1:2 direction of rotation inver., pitch circle 32mm,
Article number: 226870Radial drilling and milling head
Premium class tool system for highest production efficiency - Made in Germany
Collet chuck ER11 DIN6499
- Clamping range Ø1-7
- For collet 110 4008E
- When tightening the clamping nut, it is essential to counterhold the tool spindle.
- Failure to observe the counterholding may result in damage to the gearbox or drive coupling.
- Maximum tightening torque: 25 Nm
Загрузить PDF
| Functional length (LF) | 55.00 mm |
|---|---|
| Total height (OAH) | 100.00 mm |
| Number of holders, workpiece side (CCONWS) | 1 |
| Max. torque (TQX) | 12.00 Nm |
| Max. rotational speed, input (RPMX) | 6000 min-1 |
| Transmission relation (TR) | 1:1 |
| Transmission torque, output drive 1 (DINH201) | 2.00 Nm |
| Shank size | BMT32E |
| Interface size | Collet ER11 |
| Coolant intake | Outer cooling |
| Coupling | Surface coupling |
| Alignment system | BMT – keyway |
| Article number | 226870 |
|---|