60.4416NTY3IKI1IM - Radial drilling and milling head, For collet 160 426E (ER16 Ø1-10), Similar to DIN 1809 drive, Int. / ext. coolant pmax = 70bar, i =1:2 direction of rotation inver., inside collet nut,
Article number: 144763Radial drilling and milling head
Premium class tool system for highest production efficiency - Made in Germany
Collet chuck ER16 DIN6499
- Clamping range Ø1-10
- For collet 160 426E
- When tightening the clamping nut, it is essential to counterhold the tool spindle.
- Failure to observe the counterholding may result in damage to the gearbox or drive coupling.
- Maximum tightening torque: 50 Nm
Internal cooling
Equipped with high-quality seal kits that can withstand coolant pressure of up to 70 bar.
- 70 bar maximum coolant pressure
- Not capable of dry running
- Change between external and internal cooling possible
- Coolant must be applied to the tool at all times
Загрузить PDF
| Functional length (LF) | 60.00 mm |
|---|---|
| Total height (OAH) | 76.00 mm |
| Number of holders, workpiece side (CCONWS) | 1 |
| Max. torque (TQX) | 24.00 Nm |
| Max. rotational speed, input (RPMX) | 6000 min-1 |
| Transmission relation (TR) | 1:2 |
| Transmission torque, output drive 1 (DINH201) | 12.00 Nm |
| Shank size | BMT44 |
| Interface size | Collet ER16 |
| Coolant intake | Inner and outer cooling |
| Coupling | Surface coupling |
| Alignment system | BMT – keyway |
| Article number | 144763 |
|---|---|
| Product weight | 3.807 KG |