80.6532KRVL6FIKDIM - Radial drill. and mill. head offset, For collet 320 470E (ER32 Ø3-20), with tapered roller bearing, Similar to DIN 1809/flexible clutch, IC/EC Ceramic pmax = 70bar, i = 1:1 (input equal output), inside collet nut, Butterfly-Seal, cool.manag., polyg.
Article number: 229101Radial drilling and milling head reset
Premium class tooling system for highest production efficiency - Made in Germany
Collet chuck ER32 DIN6499
- Clamping range Ø3-20
- For collet 320 470E
- When tightening the clamping nut, it is essential to counterhold the tool spindle.
- Failure to observe the counter-hold can result in damage to the gearbox or drive coupling.
- Maximum tightening torque: 120 Nm
Tapered roller bearings (KR) - extraordinarily loadable.
- Recommended for machining operations with high torques (e.g.: milling operations with large diameters, threading operations, interrupted cut machining)
- Increase of tool life
- Reduction of service intervals
- Simultaneous radial and axial loads can be easily absorbed
EWS.HPC-Line (IKC/IKD) - Sealing technology sets standards
- Ceramic based sealing elements
- 0 - 70 bar coolant pressure
- Dry running capability without restrictions
- Speeds up to 12,000/min
- Up to 60% reduced heat generation
- Long service life - low maintenance costs
- Seal kit for the latest generation of internal coolant supply systems
Polygonal shaft hub connection
The latest series of our tool systems are equipped with polygonal shaft hub connections. Compared to tool holders with key connections, there are clear technological advantages:
- Reduced vibrations of the tool spindle
- Significantly increased power transmission
- Less gear backlash
EWS.Butterfly-Seal - sealing technology in a class of its own
- Speed-related lift-off function of the sealing element
- No friction-induced running-in of the spindle
- Reduced mold heating by up to 50%
- Effective protection against cooling emulsion and dirt particles
- Lower repair costs
EWS.Coolant Management - simply clever
- Opening and closing of external cooling with just one turn
- Coolant flow adjustable
- Time saving due to easy handling
Загрузить PDF
| Functional length (LF) | 130.00 mm |
|---|---|
| Total height (OAH) | 94.00 mm |
| Number of holders, workpiece side (CCONWS) | 1 |
| Max. torque (TQX) | 80.00 Nm |
| Max. rotational speed, input (RPMX) | 5000 min-1 |
| Transmission relation (TR) | 1:1 |
| Transmission torque, output drive 1 (DINH201) | 80.00 Nm |
| Shank size | BMT65 |
| Interface size | Collet ER32 |
| Coolant intake | Inner and outer cooling |
| Coupling | Surface coupling |
| Alignment system | BMT – keyway |
| Article number | 229101 |
|---|