80.65VX4KR1809PFIKDX100 - Radial drill. and mill. head offset, EWS - Varia VX4 - Adaptor, with tapered roller bearing, DIN1809 performance/flexible clutch, IC/EC Ceramic pmax = 70bar, i = 1:1 (input equal output), X = 100mm, Butterfly-Seal, cool.manag., polyg.
Article number: 226009Radial drilling and milling head reset
Premium class tooling system for highest production efficiency - Made in Germany
EWS.Varia VX - Tool change in 20 seconds!
With the patented quick-change system EWS.Varia VX, you perform the tool change faster than your competitors. In addition, your driven tool adapts to your requirements in the future. Due to the modular interface, for each machining process, the ideal tool clamping can be selected.
- Tool change in less than 20 seconds
- One-hand operation
- Mechanically loaded tool ejection
- Transverse force-free clamping of inserts
- Safe torque transmission
- Large selection of adapters (collet, Weldon, milling arbor, hydraulic expansion, shrinking)
- Tightening torque of 6 Nm must be observed!
Tapered roller bearings (KR) - extraordinarily loadable.
- Recommended for machining operations with high torques (e.g.: milling operations with large diameters, threading operations, interrupted cut machining)
- Increase of tool life
- Reduction of service intervals
- Simultaneous radial and axial loads can be easily absorbed
EWS.HPC-Line (IKC/IKD) - Sealing technology sets standards
- Ceramic based sealing elements
- 0 - 70 bar coolant pressure
- Dry running capability without restrictions
- Speeds up to 12,000/min
- Up to 60% reduced heat generation
- Long service life - low maintenance costs
- Seal kit for the latest generation of internal coolant supply systems
Polygonal shaft hub connection
The latest series of our tool systems are equipped with polygonal shaft hub connections. Compared to tool holders with key connections, there are clear technological advantages:
- Reduced vibrations of the tool spindle
- Significantly increased power transmission
- Less gear backlash
EWS.Butterfly-Seal - sealing technology in a class of its own
- Speed-related lift-off function of the sealing element
- No friction-induced running-in of the spindle
- Reduced mold heating by up to 50%
- Effective protection against cooling emulsion and dirt particles
- Lower repair costs
EWS.Coolant Management - simply clever
- Opening and closing of external cooling with just one turn
- Coolant flow adjustable
- Time saving due to easy handling
Загрузить PDF
| Functional length (LF) | 100.00 mm |
|---|---|
| Total height (OAH) | 94.00 mm |
| Number of holders, workpiece side (CCONWS) | 1 |
| Max. torque (TQX) | 80.00 Nm |
| Max. rotational speed, input (RPMX) | 6000 min-1 |
| Transmission relation (TR) | 1:1 |
| Transmission torque, output drive 1 (DINH201) | 80.00 Nm |
| Shank size | BMT65 |
| Interface size | EWS Varia VX4 |
| Coolant intake | Inner and outer cooling |
| Coupling | Surface coupling |
| Alignment system | BMT – keyway |
| Article number | 226009 |
|---|