40.6040NLIKCHSD10 - Axial drilling and milling head, For collet 400 472E (ER40 Ø4-26), IC/EC Ceramic pmax = 70bar, i = 1:1 (input equal output), Highspeed till 10000 1/min,
Article number: 203909Axial drilling and milling head
Premium class tool system for highest production efficiency - Made in Germany
Collet chuck ER40 DIN6499
- Clamping range Ø4-26
- For collet 400 472E
- When tightening the clamping nut, it is essential to counterhold the tool spindle.
- Failure to observe the counterholding may result in damage to the gearbox or drive coupling.
- Maximum tightening torque: 160 Nm
EWS.HPC-Line (IKC/IKD) - Sealing technology sets standards
- Ceramic based sealing elements
- 0 - 70 bar coolant pressure
- Dry running capability without restrictions
- Speeds up to 12,000/min
- Up to 60% reduced heat generation
- Long service life - low maintenance costs
- Seal kit for the latest generation of internal coolant supply systems
Highspeed
- High precision spindle bearings
- Lower heat generation at high speeds
- Not suitable for heavy machining
- Observe maximum permissible speed
Загрузить PDF
| Total height (OAH) | 108.00 mm |
|---|---|
| Number of holders, workpiece side (CCONWS) | 1 |
| Max. torque (TQX) | 100.00 Nm |
| Max. rotational speed, input (RPMX) | 10000 min-1 |
| Transmission relation (TR) | 1:1 |
| Transmission torque, output drive 1 (DINH201) | 100.00 Nm |
| Shank size | BMT60 DMG Mori |
| Interface size | ER40 |
| Coolant intake | Inner and outer cooling |
| Coupling | Surface coupling |
| Article number | 203909 |
|---|---|
| Product weight | 6.961 KG |