LNKX/LNMT 1506PNTN/PN-N MM
Tangentially Clamped Inserts with a Reinforced Negative Land for Unfavorable Conditions(+)
| Designation | W1 | L | S | RE | fz (min) |
fz (max) |
APMX | Tough ‹————› Hard Grade & Vc Click on Grade No. for Cutting Speed |
|
|---|---|---|---|---|---|---|---|---|---|
| LNKX 1506PN-N MM | 6.00 | 15.00 | 13.88 | 0.80 | 0.10 | 0.20 | 7.00 | IC328 IC928 IC950 IC908 IC5400 | |
| LNKX 1506PNTN | 6.00 | 15.00 | 13.88 | 0.80 | 0.10 | 0.20 | 7.00 | IC810 IC910 DT7150 IC5100 | |
| LNKX 150612-PNTN | 6.00 | 15.00 | 13.88 | 1.20 | 0.10 | 0.20 | 7.00 | IC910 | |
| LNMT 1506PN-N MM | 6.00 | 15.00 | 13.95 | 0.80 | 0.10 | 0.20 | 7.00 | IC328 IC928 IC950 IC908 | |
| LNMT 1506PNTN | 6.00 | 15.00 | 13.95 | 0.80 | 0.10 | 0.20 | 7.00 | IC910 DT7150 IC5100 | |
| LNMT 150616PN-N MM | 6.00 | 15.00 | 13.95 | 1.60 | 0.10 | 0.20 | 7.00 | IC928 |