80.4525DTC600IKIMX85 - Radial drill. and mill. head offset, For collet 250 430E (ER25 Ø2-16), double spindle, Similar to DIN 1809 drive, Int. / ext. coolant pmax = 25bar, i =1:1 direction of rotation inver., inside collet nut, X = 85mm,
Article number: 206806Radial drilling and milling head reset
Premium class tooling system for highest production efficiency - Made in Germany
Collet chuck ER25 DIN6499
- Clamping range Ø2-16
- For collet 250 430E
- When tightening the clamping nut, it is essential to counterhold the tool spindle.
- Failure to observe the counterholding may result in damage to the gearbox or drive coupling.
- Maximum tightening torque: 90 Nm
Internal cooling
Equipped with high-quality seal kits that can withstand coolant pressure of up to 25 bar.
- 25 bar maximum coolant pressure
- Not capable of dry running
- Change between external and internal cooling possible
- Coolant must be applied to the tool at all times
Загрузить PDF
| Total height (OAH) | 75.00 mm |
|---|---|
| Number of holders, workpiece side (CCONWS) | 2 |
| Max. torque (TQX) | 25.00 Nm |
| Max. rotational speed, input (RPMX) | 6000 min-1 |
| Transmission relation (TR) | 1:1 |
| Transmission torque, output drive 1 (DINH201) | 25.00 Nm |
| Transmission torque 2 (DINH202) | 25.00 Nm |
| Shank size | BMT45 |
| Interface size | Collet ER25 |
| Coolant intake | Inner and outer cooling |
| Coupling | Surface coupling |
| Alignment system | BMT – keyway |
| Article number | 206806 |
|---|---|
| Product weight | 7.776 KG |