50.4025.4WNKRLT15RLIKI2 - Ax. drill. and mill. head offset, Whistle Notch/Weldon Ø25.4 ( 1" ), with tapered roller bearing, claw coupling drive, Int. / ext. coolant pmax = 70bar, i =2:1 direction of rotation inver.,
Article number: 156267Загрузить PDFAxial drilling and milling head with offset axes
Premium class tooling system for highest production efficiency - Made in Germany
Tapered roller bearings (KR) - extraordinarily loadable.
- Recommended for machining operations with high torques (e.g.: milling operations with large diameters, threading operations, interrupted cut machining)
- Increase of tool life
- Reduction of service intervals
- Simultaneous radial and axial loads can be easily absorbed
Double toothing (Traub license)
- VDI shank double toothed.
- Tool holder can be rotated 180°.
- Note: Rotatability may be restricted by alignment systems (e.g. Trifix).
Internal cooling
Equipped with high-quality seal kits that can withstand coolant pressure of up to 70 bar.
- 70 bar maximum coolant pressure
- Not capable of dry running
- Change between external and internal cooling possible
- Coolant must be applied to the tool at all times
| Total height (OAH) | 98.00 mm |
|---|---|
| Number of holders, workpiece side (CCONWS) | 1 |
| Max. torque (TQX) | 40.00 Nm |
| Max. rotational speed, input (RPMX) | 6000 min-1 |
| Transmission relation (TR) | 1,963:1 |
| Transmission torque, output drive 1 (DINH201) | 80.00 Nm |
| Shank size | VDI40 |
| Interface size | Weldon Ø 100.0 Whistle Notch Ø 100.0 |
| Coolant intake | Inner and outer cooling |
| Coupling | Claw coupling |
| Alignment system | Stop bar, adjustable |
| Article number | 156267 |
|---|---|
| Product weight | 8.024 KG |