80.5040TOEMRIKI2 - Radial drill. and mill. head offset, For collet 400 472E (ER40 Ø4-26), crown coupling drive, Int. / ext. coolant pmax = 70bar, i = 2:1 same rotating direction,
Article number: 154662Загрузить PDFRadial drilling and milling head reset
Premium class tooling system for highest production efficiency - Made in Germany
Collet chuck ER40 DIN6499
- Clamping range Ø4-26
- For collet 400 472E
- When tightening the clamping nut, it is essential to counterhold the tool spindle.
- Failure to observe the counterholding may result in damage to the gearbox or drive coupling.
- Maximum tightening torque: 160 Nm
Internal cooling
Equipped with high-quality seal kits that can withstand coolant pressure of up to 70 bar.
- 70 bar maximum coolant pressure
- Not capable of dry running
- Change between external and internal cooling possible
- Coolant must be applied to the tool at all times
| Functional length (LF) | 124.00 mm |
|---|---|
| Total height (OAH) | 108.00 mm |
| Number of holders, workpiece side (CCONWS) | 1 |
| Max. torque (TQX) | 80.00 Nm |
| Max. rotational speed, input (RPMX) | 4000 min-1 |
| Transmission relation (TR) | 2:1 |
| Transmission torque, output drive 1 (DINH201) | 160.00 Nm |
| Shank size | VDI50 |
| Interface size | ER40 |
| Coolant intake | Inner and outer cooling |
| Coupling | Claw coupling |
| Alignment system | Pin (Bar) |
| Article number | 154662 |
|---|---|
| Product weight | 16.781 KG |